Oh hi, blog land! It’s been, uhhh, six-ish months since I’ve posted anything here… Which, well, sucks. I’m still here, you guys, and I still want to do this diy blog life thing. It’s hard lately. By way of explanation, a second job kind of fell into my lap last December, and I jumped at the chance to take it. It’s a lot of work, dudes. Like, a LOT. I’m not complaining, though, because it’s fun work. And, well, I like money. I’ve got lotsa diy dreams, and money will certainly help me accomplish them. It’s just been a busy whirlwind that hasn’t left me a cache of energy to work on projects (or finish the five or so that I’ve got in progress/half done). In any case, I want to pledge to balance business and pleasure better, so hopefully I’ll be around on here more often. I’ve got something to share today, though, so let’s get started!
My mom has these rose bushes… She loves them dearly. She planted them at the house where we lived while I was in junior high and high school. When she and my father downsized after my sister and I moved out, my dad carefully dug them up so she could transplant them to their new yard. Five or so years later, they’re still doing pretty well, despite one getting a rose disease. Yes, rose diseases are a real thing.
She’s always snipping off a rose or two and giving them to me and my sister, or displaying them in jars around the house. So for Mother’s Day, I made my Mom a wall mounted bud vase!
I can’t take full cred for the idea. Buzzfeed’s Nifty Facebook page posted a video of three mason jars being mounted to a board to display succulents, organize your bathroom, etc. I just took the idea and modified it. It was easy peasy, lemon squeezy!
- Block of wood (mine was a scrap)
- Acrylic paint
- Hose clamp
- Sawtooth hanger
- Phillips head screwdriver
- Flat head screwdriver
- Foam paintbrush
- Hot glue gun + 1 hot glue stick
1. Paint your wood block. The first coat is pictured here, but I ended up painting three coats on the front and two on the edges.
2. Prep your jar. I used a salsa jar, which still had salsa in it, and since I don’t waste salsa EVER, I poured it into a plastic food saver and proceeded to wash the jar.
- Wash the jar thoroughly with hot water and dish soap.
- Use goo-gone to help you get the label off. The kind in the spray nozzle bottle is amazing.
- To remove printed-on “best if used by” dates, soak a cotton ball in a little bit of rubbing alcohol or nail polish remover and gently wipe off the ink.
3. Add twine or ribbon to the rim. The threading on the top rim of the jar makes it very obvious that it’s a salsa jar. Using hot glue to affix twine around the rim gives it a much more finished look.
I don’t have pics of the below parts of the process, but Buzzfeed’s video is a good resource for visuals for the parts I’m about to explain.
4. Attach your sawtooth hanger to the back of your board. Because I did a vertical bud vase I attached it to the very top in the middle, using the tiny nails that come with the hanger, and a hammer. If you’re making a horizontal hanger, you’ll probably want to use two sawtooth hangers towards each top corner of the board. Because I sometimes get asked what a sawtooth hanger is, look here:
5. Attach the hose clamp to your board. You’ll want to measure to find the middle of your board and then mark where you’re going to screw the hose clamp in. Make a very small pilot hole for your screw. Open the hose clamp and use a Phillips head screw to attach the clamp to the board.
6. Insert the jar in the hose clamp, and use a flathead screwdriver to tighten the hose clamp down taut so that the jar has no wiggle room. Not too tight, though, you don’t want to break your vase!
7. Hang, add water and pretty flowers, enjoy!
And because I love the waterlogue app and how pretty it makes flowers look, here’s a waterlogue pic of the vase:
This was so easy and inexpensive to make! I want to make a ton more so I can display all of the flowers! 🌻💐🌺🌸🌼🌷🌹